Product Outline
XLD200 is Xielide’s new generation of HEVC/H.265 & MPEG 4 AVC/H.264 encoder which is developed based on XLD200 platform. It supports up to 3 H.265/H.264 encoding modules with 4 HDMI interfaces on each module. With B frame (IBBP) GOP structure and advanced compressing algorithm, this device enhances picture quality and provides ultra low bitrate to save 75% bandwidth compared with H.264/AVC and it supports up to 2160P 30Hz resolution.
It also has 1 data port (1000M/100M) for IP output (1 MPTS and max 4 SPTS per module) over UDP/RTP/RTSP protocol and 1 Network Management port to manage the 3 modules individually through 3 different IP addresses.
In conclusion, its high performance and cost-effective design make this device widely used in CATV digital head-end, business application, IPTV/OTT system, etc.
Principle Chart (the number of encoding channels depend on encoding format and resolution)
Specifications
|
Input |
12×HDMI input (1.4), HDCP 1.4 |
|||
|
Video Encoding |
Encoding Format |
HEVC /H.265, MPEG 4 AVC/H.264 |
||
|
Resolution |
HDMI-VersionⅠ |
3840×2160_30P, 3840×2160_29.97P (Encoding 2 CHs per module for H.265, and encoding 1 CH for H.264 ) 1920×1080_60P,1920×1080_59.94P,1920×1080_50P, (Encoding 4 CHs per module for H.265, and encoding 2 CHs for H.264) 1280×720_60P, 1280×720_59.94P, 1280×720_50P (Encoding 4 CHs per module for H.264 and H.265) |
||
|
HDMI-VersionⅡ |
1920×1080_60P,1920×1080_59.94P,1920×1080_50P, (Encoding 4 CHs per module for H.265, and encoding 2 CHs for H.264) 1280×720_60P, 1280×720_59.94P, 1280×720_50P (Encoding 4 CHs per module for H.264 and H.265) |
|||
|
Input: 1920×1080_60i,1920×1080_59.94i,1920×1080_50i Output: 1920×1080_60P,1920×1080_59.94P,1920×1080_50P (Encoding 4 CHs per module for H.265, and encoding 2 CHs for H.264) |
||||
|
Chroma |
4:2:0 |
|||
|
Bitrate |
0.5Mbps~20Mbps (each channel) |
|||
|
Rate Control |
CBR/VBR |
|||
|
GOP Structure |
IBBP, IPPP |
|||
|
Advanced Pretreatment |
De-interlacing, Noise Reduction, Sharpening |
|||
|
Audio Encoding |
Encoding Format |
MPEG-1 Layer 2, LC-AAC, HE-AAC, HE-AAC V2 |
||
|
Sampling rate |
48KHz |
|||
|
Bit-rate (each channel) |
48Kbps~384Kbps (MPEG-1 Layer 2 & LC-AAC) 24 Kbps~128 Kbps (HE-AAC) 18 Kbps~56 Kbps (HE-AAC V2) |
|||
|
Audio Gain |
0~255 |
|||
|
Stream output |
1 MPTS and maximum 4 SPTS (per module) output over UDP/RTP/RTSP, 1000M/100M Base-T Ethernet interface (unicast/ multicast) IP null packet filter |
|||
|
System |
Web based management |
|||
|
Chinese-English control interface |
||||
|
Ethernet software upgrade |
||||
|
Miscellaneous |
Dimension (W× L× H) |
482mm×328mm×44mm |
||
|
Approx weight |
5kg |
|||
|
Temperature |
0~45℃(work), -20~80℃（Storage） |
|||
|
Power |
AC 100V-220V±10%, 50/60Hz |
|||
Dexin HEVC/H.265 encoder’s advantages
1. Providing smooth TS for modulators
Xielide HEVC/H.265 encoder adopts Fujitsu chip which offers stable bitrate with lower fluctuation compared with other encoding chips, so it provides smooth TS for modulators. It is widely used in variety of digital distribution systems such as CATV digital head-end, satellite and terrestrial digital TV, etc.
2. Encoding with highest compression format—B frame (IBBP)
What is B Frame?
There are 3 major picture types used in the different video algorithms, they are I, P and B.
They are different in the following characteristics:
I‑frames are the least compressible but don't require other video frames to decode.
P‑frames can use data from previous frames to decompress and are more compressible than I‑frames.
B‑frames can use both previous and forward frames for data reference to get the highest amount of data compression.
|
Frame Type |
Byte of data/KB |
Compression Ratio |
|
I |
18 |
7:1 |
|
P |
6 |
20:1 |
|
B |
2.5 |
50:1 |
In one word, B frame is the highest compression format which makes it possible to process HD video at low bit rate. HEVC/H.265 encoder is not able to save bandwidth unless it is with B frame. In encoder parameters, B frame is often described in GOP (Group of Pictures) structure, like “IBBP”.
